Page 1 of 1

Remove motor from Simplex gurdy

Posted: Mon Sep 07, 2015 1:25 pm
by peteroddy
The old motor needs to come off and is stuck. Are there any set screws or other impediments? Or just beat on everything?

Re: Remove motor from Simplex gurdy

Posted: Fri Sep 11, 2015 8:06 pm
by Salty
Never had a simplex.

Re: Remove motor from Simplex gurdy

Posted: Wed Oct 14, 2015 10:26 pm
by fvsedna
If the motor Is bolted on a bronze flanged tube that is bolted to the end of the last gurdie stancion their shouldn't be anything other than a woodruf key on the motor shaft stuffed inside a bronze sleeve or coupling......sometimes they stick...work on it ...It'll come loose. If you can get a small separation between the motor face & the bronze sleeve...a couple wide flat bladed screwdrivers or thin wedges will get It to back off...just careful prying against the soft bronze. Hope that helps..
Andrew