Simnplex Gurdies need help

Discussion related to commercial salmon trolling, boats, gear, fishing techniques, electronics, marketing, etc.
Post Reply
grinder
Member
Posts: 28
Joined: Wed Sep 16, 2009 7:36 pm
Spammer?: No

Simnplex Gurdies need help

Post by grinder »

Looking for some help I am trying to take the motor mount off of my gurdies and I can get it to budge. Not sure if its held in with a pin or not. Any help would be appreciated.
Crawfish
Site Supporter
Site Supporter
Posts: 160
Joined: Tue Feb 11, 2014 11:00 am
Spammer?: No

Re: Simnplex Gurdies need help

Post by Crawfish »

The motor should be a slip fit.
There is a coupler that has a key in it for both the shaft and the motor to mate together.
Try to pull the bronze screw out of the coupling housing and fill it full of diesel or some other lubricant.
Do you have stainless or bronze shafts?
Post a pic if you can so I can see if what you are working on are the same as mine.
Post Reply