Swivel or no swivel on spoon?
-
- Site Supporter
- Posts: 35
- Joined: Wed Jan 18, 2012 10:17 pm
- Spammer?: No
Swivel or no swivel on spoon?
Quick question. I am welding SS rings to inexpensive spoon blanks . I am doing this to reduce cost as I am still in the gear loosing stage of my trolling career. Commercial trolling spoons come with a swivel to attach to the leader. A troller on my dock always removes the swivel because he claims it catches kelp and jellys and is easer to clean without it. Any opinion on swivel or no swivel. Does it improve the action or keep leader twist down? Thanks in advance.
- Attachments
-
- image.jpg
- (186.61 KiB) Not downloaded yet
Re: Swivel or no swivel on spoon?
I'd try making them both with and without.
Re: Swivel or no swivel on spoon?
Depends on the spoon and swivel. On very small spoons with small swivels I remove them because they might fail on a large king.
Re: Swivel or no swivel on spoon?
What size of rings do you use when you're putting the rings on king salmon spoons and when you talk about welding do you use a soldering gun? And what are those rings called like if I'm looking online.
Re: Swivel or no swivel on spoon?
I was once advised to do the same thing for the same reason. Guy said, "you don't need two swivels" (the other being on the leader snap).
-
- Site Supporter
- Posts: 35
- Joined: Wed Jan 18, 2012 10:17 pm
- Spammer?: No
Re: Swivel or no swivel on spoon?
I bought them from west coast chainmail. www.chainmaildude.com. I bought 18 gage and 16 gage. (#ss18A516 and #ss16516) I think I prefer the smaller gage (18 gage). Both 5/16 diameter. They cost about $3.00 per hundred. I TIG weld them with stainless rod. Last year I put together lures with split rings, and didn't like the results.
-
- Member
- Posts: 225
- Joined: Sat Jan 10, 2009 4:31 pm
- Spammer?: No
- Location: Bandon Or
Re: Swivel or no swivel on spoon?
I no longer use swivels on my hootchi rigs as they tend to rot the hooks
Re: Swivel or no swivel on spoon?
If I man does not have access to a TIG welder is there any other way to do it? Or do they make a split ring that is tough enough that a guy can use?
Re: Swivel or no swivel on spoon?
thediverdude - I remove swivels on spoons smaller than a #5 Canadian (my most productive Coho spoon). I leave the barrel swivels on anything larger. I have found that the bulkier ball-bearing swivels [like what is shown in your picture] will pick up more jelly than the common barrel swivels and IMO are a lot more expensive. Good luck!
Re: Swivel or no swivel on spoon?
lone eagle wrote:I no longer use swivels on my hootchi rigs as they tend to rot the hooks
Have you had any problems with the leader working its way off of the hooks?
-
- Member
- Posts: 225
- Joined: Sat Jan 10, 2009 4:31 pm
- Spammer?: No
- Location: Bandon Or
Re: Swivel or no swivel on spoon?
I now use a stainless split ring instead of a swivel and attach the leader to the ring using a loop and jinkai sleeve. The mono can chafe though and I'm tempted to use a knot to the ring....but no more swivels
Re: Swivel or no swivel on spoon?
I don't use swivels anymore on most of my spoons or hootchies. Just tie or sleeve to the spoon or hook. Sleeves gather less jelly than knots or swivels. I went to better and cheaper sleeves than Jinkai years ago. For kings I double up the sleeves.
Re: Swivel or no swivel on spoon?
Salty wrote:I don't use swivels anymore on most of my spoons or hootchies. Just tie or sleeve to the spoon or hook. Sleeves gather less jelly than knots or swivels. I went to better and cheaper sleeves than Jinkai years ago. For kings I double up the sleeves.
I have used Jinkai aluminum sleeves for the last 18 years. They are expensive though.
I didn't know they made a better one. Curious as to why you would put two sleeves on?
Is it because the leader slips through the first sleeve ? Or are you using the second sleeve to offset your hootchie skirt length in conjunction with a bead?
Do you still use the Jinkai crimping tool?
-
- Member
- Posts: 225
- Joined: Sat Jan 10, 2009 4:31 pm
- Spammer?: No
- Location: Bandon Or
Re: Swivel or no swivel on spoon?
I was curious too. I use jinkai sleeves, just one, and have had no loses so far
Re: Swivel or no swivel on spoon?
I switched from a jinkai crimper to a mustad brand only because I couldn't find a jinkai at the time and glad I did. I think the mustad crimper tool is superior to the jinkai.
Re: Swivel or no swivel on spoon?
Great discussion guys. There are better and cheaper sleeves out there. I use "Fisherman's " from North Pacific exclusively now because they seem to be the best quality.
A very smart troller friend of mine and I spent several hours testing sleeves until they broke a few years ago. A close up super slow motion video would have been nice. Here is what mostly happens when single sleeved. The sleeve slips and the loop around the hook or swivel collapses, then if there is still great pull the mono pulls through the sleeve or, if the leader is crimped on the end, the sleeve splits or if the sleeve is crimped too tight the mono breaks in the sleeve.
Double sleeving eliminates the slip and sleeve failure. The line will still break in the sleeve closest to the loop if crimped too tight. When double sleeved correctly the line breaks in the loop or above the sleeves.
Yes, I crimp the tip of the mono instead of burning or melting it.
A very smart troller friend of mine and I spent several hours testing sleeves until they broke a few years ago. A close up super slow motion video would have been nice. Here is what mostly happens when single sleeved. The sleeve slips and the loop around the hook or swivel collapses, then if there is still great pull the mono pulls through the sleeve or, if the leader is crimped on the end, the sleeve splits or if the sleeve is crimped too tight the mono breaks in the sleeve.
Double sleeving eliminates the slip and sleeve failure. The line will still break in the sleeve closest to the loop if crimped too tight. When double sleeved correctly the line breaks in the loop or above the sleeves.
Yes, I crimp the tip of the mono instead of burning or melting it.
Re: Swivel or no swivel on spoon?
For us new guys links to suppliers would be nice - I can't locate North Pacific as a supplier from a google search.
Re: Swivel or no swivel on spoon?
"North Pacific"
Is Pacific Net and Twine's House brand I believe.
Is Pacific Net and Twine's House brand I believe.
Re: Swivel or no swivel on spoon?
We also have Lou Holtz's sleeves here at Murray Pacific for about half the price of Jinkai. Seem to work fine.
Re: Swivel or no swivel on spoon?
http://pacificnetandtwine.com/ will get you to the troll gear