Remove motor from Simplex gurdy
Remove motor from Simplex gurdy
The old motor needs to come off and is stuck. Are there any set screws or other impediments? Or just beat on everything?
Re: Remove motor from Simplex gurdy
Never had a simplex.
Re: Remove motor from Simplex gurdy
If the motor Is bolted on a bronze flanged tube that is bolted to the end of the last gurdie stancion their shouldn't be anything other than a woodruf key on the motor shaft stuffed inside a bronze sleeve or coupling......sometimes they stick...work on it ...It'll come loose. If you can get a small separation between the motor face & the bronze sleeve...a couple wide flat bladed screwdrivers or thin wedges will get It to back off...just careful prying against the soft bronze. Hope that helps..
Andrew
Andrew